The future of manufacturing…on two wheels

Bristol07 March 2011

  • EADS produces world’s first bike using revolutionary ALM technology - ‘grown’ from high-strength nylon powder
  • Called the ‘Airbike’ because Airbus was the first EADS company to use the technology
  • New technology will transform manufacturing around the globe
EADS produces world’s first bike using revolutionary ALM technology - ‘grown’ from high-strength nylon powder. Called the ‘Airbike’ because Airbus was the first EADS company to use the technology (c) EADS EADS produces world’s first bike using revolutionary ALM technology - ‘grown’ from high-strength nylon powder. Called the ‘Airbike’ because Airbus was the first EADS company to use the technology (c) EADS

EADS, the European aerospace and defence group, has unveiled the world’s first bike that uses a revolutionary new manufacturing process which demonstrates the potential to transform manufacturing around the globe.

Known as the ‘Airbike’, it is a bike with a difference. Made of nylon but strong enough to replace steel or aluminium, it requires no conventional maintenance or assembly. It is ‘grown’ from powder, allowing complete sections to be built as one piece; the wheels, bearings and axle being incorporated within the ‘growing’ process and built at the same time. The Airbike can be built to rider specification so requires no adjustment.

The revolutionary manufacturing process is known as Additive Layer Manufacturing (or ALM) and it allows single products to be grown from a fine powder of metal (such as titanium, stainless steel or aluminium), nylon or carbon-reinforced plastics from a centre located next to Airbus’ site at Filton. Similar in concept to 3D printing, the bike design is perfected using computer-aided design and then constructed by using a powerful laser-sintering process which adds successive, thin layers of the chosen structural material until a solid, fully-formed bike emerges.

Robin Southwell, Chief Executive of EADS UK, commented: “The Airbike is a fantastic example of British innovation at its very best. The team at EADS in Bristol includes world-class engineers who continue to push boundaries by working at the forefront of technology. I believe that ALM technology represents a paradigm shift.”

While the Airbike is only a technology demonstrator at this stage, EADS has developed the technology to the extent that it can manipulate metals, nylon, and carbon-reinforced plastics at a molecular level which allows it to be applied to high-stress, safety critical aviation uses. Compared to a traditional, machined part, those produced by ALM are up to 65% lighter but still as strong. The technology is likely to be employed in due course in industrial applications such as aerospace, the motor industry and engineering. Studies show that for every 1kg reduction in weight, airlines can save around $3500 worth of fuel over the lifespan of the aircraft, with corresponding reductions in carbon-dioxide emissions.

Minister for Business and Enterprise, Mark Prisk, said: "I am proud to see the UK - through EADS and others - leading the world in the development of innovative products. Additive Layer Manufacturing, or ‘3-D printing’, is a truly exciting, green, new technology, which not only enables the creation of products beyond the capability of traditional manufacturing processes, but also offers the potential to help the manufacturing sector slash its waste and carbon emissions. This is exactly the sort of advanced technology that we want to see companies investing in, here in the UK."

ALM also offers a glimpse of wider potential benefits. The process itself uses about one-tenth of the material required in traditional manufacturing and reduces waste. On a global scale, ALM offers potential for products to be produced quickly and cheaply on ‘printers’ located in offices, shops and houses. It would allow replacement components to be produced in remote regions, improving logistics on humanitarian relief and military operations.

Andy Hawkins is the lead engineer for ALM at EADS. “The possibilities with ALM are huge – it’s a game-changing technology. The beauty is that complex designs do not cost any extra to produce. The laser can draw any shape you like and many unique design features have been incorporated into the Airbike such as the auxetic structure to provide saddle cushioning or the integrated bearings encased within the hubs.”

Further ahead, by removing production lines and the need for factories, the costs of ‘manufacturing’ will be significantly reduced and, through this, ALM has the potential to reverse trends of urbanization that have historically accompanied industrialization.

Iain Gray, Chief Executive of the Technology Strategy Board, said: “It is hugely exciting to see examples of British engineers showcasing their work so effectively. The ‘Airbike’ is an example of technology innovation which stands a real chance of providing UK businesses with a manufacturing edge for the future while delivering economic growth both here and around the globe.”

Whilst there are currently limitations in terms of the maximum component size achievable and the costs involved, the technology is developing fast. There is growing recognition of the potential ramifications of ALM and the barriers to delivering this technology on a global scale are falling rapidly.

Notes for editors:

  1. Broadcast: BBC Inside Out West: 7 March 2011 (19.30pm), (BBC iPlayer from [8 March])
  2. Airbike’s unique design features include:
  • Frame: integrated truss structure to reduce weight but maintain stiffness:
  • Saddle: auxetic structure to provide cushioning;
  • Wheels: spoke design mimics the unique A400M eight-bladed scimitar propeller design;
  • Drivetrain: Kevlar belt creates clean drive system;
  • Crank / hubs: integrated bearings encased in hubs and crank and manufactured in-situ;
  • Personalisation: embossed text in various positions.
  1. Auxetics: Auxetic shapes or materials appear to defy the laws of physics. If you squeeze, the entire structure compresses (instead of getting thicker), if you pull the entire structure gets bigger (as opposed to getting thinner). These structures have mechanical properties such as high energy absorption and fracture resistance and can be used in applications as far-ranging as building structures or body armour.

EADS (www.eads.com). EADS is a global leader in aerospace, defence and related services. In 2009, the Group – comprising Airbus, Astrium, Cassidian and Eurocopter – generated revenues of € 42.8 billion and employed a workforce of more than 119,000, including more than 16,500 employees in the UK.

Contacts:

Jeremy Greaves
Head of Communications Airbus Group United Kingdom
Airbus Group
 
Tel.: +44 20 78 45 84 19
Fax: +44 20 78 45 84 01
 

Downloads

Press Release

PDF